![]() |
| twrp_partition_sd_card |
Again not all devices will be able to read your sdcard after partitioning through TWRP but will be detected when using your computer but on your device it will detect as Microsd on 0Mb and will require to reformat to be usable again.
Disclaimer: I am not held responsible if you destroy your sdcard or selected your internal memory deleting all your installed apps or datas, do it at your own risk as I also did when I partitioned my sdcard using TWRP.
Things needed:
1. A rooted phone or unlocked bootloader
2. TWRP flashed to your device
note:
-tutorial on how to unlock bootloader here.
-tutorial on how to flash TWRP here.
Steps:
1. Boot into twrp recovery (volume down+power)-check your device if its on volume up+power.
2. Simply click the advance tab.
1. A rooted phone or unlocked bootloader
2. TWRP flashed to your device
note:
-tutorial on how to unlock bootloader here.
-tutorial on how to flash TWRP here.
Steps:
1. Boot into twrp recovery (volume down+power)-check your device if its on volume up+power.
2. Simply click the advance tab.
![]() |
| advanced |
5. Now set the extension size you wish to extend like 2gb, 3gb and so on (for this tutorial since I have a 32gb microsd I chose 8gb). This size will be alloted for your device when installing apps as extension to free up your internal memory from too much datas installed.
![]() |
| extension_size |
6. Just input 0 on swap size as most experts say this is not needed by your device.
7. Select ext3 or ext4, depending on your device just make some trial and error which extension will be readable to your device.
8. Wait until it says partitioning complete.
7. Select ext3 or ext4, depending on your device just make some trial and error which extension will be readable to your device.
8. Wait until it says partitioning complete.
![]() |
| complete! |
9. Congrats! You just partitioned your sdcard for your android device.
10. Now check if your device can read your newly partition sdcard.
note: tested this for asus zenfone 2 laser 5.5s ze550kl asus z00ld but could not be read by the device so minitool partiton was used instead here.
Next post...How to create a backup stockrom using TWRP here.
Share with friends if you found this tutorial helpful.
10. Now check if your device can read your newly partition sdcard.
note: tested this for asus zenfone 2 laser 5.5s ze550kl asus z00ld but could not be read by the device so minitool partiton was used instead here.
Next post...How to create a backup stockrom using TWRP here.
Share with friends if you found this tutorial helpful.







