UNLOCKING GLOBE TATTOO E153u-2

globe-tattoo-e153u-2

Do you still have your old globe tattoo stick like e153u-2 with you? If yes, then we can unlock it permanently and use other network simcards like smart or sun.

By the way the globe tattoo e153u-2 is also the same as Huawei e153u-2 devices it was just rebranded by the said network.

Disclaimer: I am not held responsible if you brick or destroy your device, do it at your own risk as I also did when I unlocked mine.

TOOLS OR THINGS NEEDED:

1. E153 UPDATE (download and extract and save to your desktop)-here

2. HUAWEI FLASHER (download rar file open and right click, no need to install)-here

3. QUALCOMM QPST (download and install to your computer)-here

4. INTERNET CONNECTION WHEN USING HUAWEI FLASHER (a must! you need to have an internet access via wifi when doing the process when using huawei flasher)

5. COMPUTER DESKTOP OR LAPTOP

6. BROADBAND TO UNLOCK GLOBE E153 MODELS

7. GUTS :)

STEPS:

STEP 1: CLICK COMPUTER ICON FROM DESKTOP AND CLICK MANAGE.

manage-computer

STEP 2: CLICK ON DEVICE MANAGER

device-manager

STEP 3: CLICK PORTS AND REMEMBER THE PORT THAT WILL APPEAR MINE IS COM 8

remember-port

STEP 4: OPEN QPST CONFIGURATION

open-qpst

STEP 5: CLICK IP SERVER AND CHECK ACCEPT CLIENT CONNECTIONS

qpst-configuration

STEP 6: CLICK PORTS AND CLICK TO ADD NEW PORT

add-new-port

STEP 7: UN-CHECK SHOW SERIAL AND USB/QC DIAGNOSTIC PORTS ONLY (BOX) AND SELECT THE PORT OF YOUR MODEM OBTAINED FROM STEP 3 THEN CLICK OK TO PROCEED

uncheck-show-serial

SAMPLE SCREEN SHOT

sample

STEP 8: NOW CLICK ON START CLIENTS AND SCROLL TO SOFTWARE DOWNLOAD

software-download

STEP 9: YOUR PORT WILL BE DETECTED AS SHOWN BELOW IF NOT JUST CLICK BROWSE AND SEARCH FOR YOUR PORT (FROM STEP 3)

select-port

STEP 10: ONCE DETECTED SIMPLY CLICK ON BACKUP TAB AND SELECT WHERE YOU WANT TO SAVE (DESKTOP OR USB ETC)

back-up

STEP 11: EXIT QPST WHEN BACKUP IS COMPLETE, NOW YOU MAY OPEN HUAWEI FLASHER (USING THIS FLASHER WE NEED INTERNET CONNECTION TO BE ABLE TO SUCCESSFULLY FLASH OUR MODEM-YOU MAY TRY TO CONNECT VIA WIFI USING YOUR LAPTOP WHEN DOING THIS)

back-up-complete

STEP 12: CLICK EXE FILE AND SCROLL TO YOUR PORT THEN CLICK ON SELECT FIRMWARE TAB

select-firmware

STEP 13: NOW CLICK EXTRACT FROM EXE AND OPEN WHERE YOU HAVE SAVED YOUR E153

browse-firmware

STEP 14: YOU WILL NOW BE ASKED WHERE YOU WANT TO SAVE JUST CLICK ON DESKTOP FOR EASIER ACCESS

save-to-desktop

STEP 15: ONCE E153 IS SAVED UNCHECK #6 BIN AND CLICK ON FLASH MODEM AND CHOOSE NORMAL MODE

uncheck-#6bin

STEP 16: DURING THE FLASHING PROCESS YOU WILL BE ASKED TO SAVE OR BACKUP YOUR NVBACKUP MEMORY FILES JUST CLICK OK, ANOTHER TAB WILL POP UP AND WAIT UNTIL FOUND NEW HARDWARE IS DETECTED OR OBSERVE IF THE CURRENT PORT WILL CHANGE, MINE FROM COM8 TO COM10 THEN CLICK OK

wait-for-found-new-hardware

STEP 17: ONCE YOU CLICK THE OK BUTTON WAIT UNTIL IT FINISHES TO WRITING 08 BIN , SOME WILL BE SUCCESSFUL AND PROCEED TO 09 BIN WHILE SOME WILL HAVE THIS "FAIL ACK 0X03" AT 08BIN, FOR THOSE WHO FAIL AT 08 BIN, SIMPLY CLOSE THE FLASHER AND OPEN AGAIN QPST TO RESTORE YOUR NVBACKUP

writing-08-bin

STEP 18: AGAIN SELECT THE PORT OF YOUR MODEM (JUST LIKE FROM STEP 6-7) CLICK ON START CLIENTS TAB AND CHOOSE SOFTWARE DOWNLOAD THIS TIME WE NOW SELECT THE RESTORE TAB (IT WILL AUTO DETECT YOUR BACKUP, IF NOT SIMPLY CLICK BROWSE AND LOCATE YOUR FILE). CLICK THE START BUTTON AND WAIT UNTIL IT SAYS MEMORY RESTORE COMPLETE AND THEN HIT THE EXIT BUTTON

restore

STEP 19: AFTER SUCCESSFUL RESTORE YOUR MODEM WILL REBOOT AND WAIT IF NEW DEVICE IS DETECTED PROMPTING YOU TO OPEN EITHER THE AUTORUN.EXE OR TO YOUR DASHBOARD